Robotronics

3D Printer Kits and Components

Robotronics News

I have new BPS V2 extruder kits in stock. These kits now include everything you need to get up and running, a stepper motor, thermistors, fan and printed shroud for the heat sink, heater cartridge etc.

If you would like to be notified when new stock arrives please subscribe to our mailing list, like our facebook page or just check back regularly.

BPS 3D Printer Extruder Kit V2.0 for 1.75mm Filament

## Australian Designed and Manufactured ##

Here is the Awesome BPS V2.0 Extruder. This extruder and hot end combination is Australian Designed and Manufactured and has some very nice design features.
Along with the basic kit I include a 4000g.cm NEMA 17 stepper motor, two Semitec thermistors, a lead with plug for wiring the thermistor, a 25mm fan and printed shroud, a 40W cartridge heater, and an upgraded spring and bolt.

Read more

Price: $175.00
SKU: 3DP_BPS2_KIT

This is the popular RAMPS 3D printer controller for RepRap style printers. It includes an Arduino Mega2560 R3 compatible board, RAMPS 1.4 shield and five A4988 Stepsticks (100% Pololu compatible). Also included are five headsinks with heat conductive adhesive stickers and a professional ceramic screw driver for adjusting the current potentiometer on the A4988 stepper motor drivers. You also get a 40mm fan for active cooling of your stepper drivers.

Read more

Price: $44.95
SKU: 3DP_RAMPS-SET-01

If you want to print with materials that require a higher temperature than the usual ABS or PLA you will need an all metal hotend such as the new Hexagon Hotend. This hotend set come with three nozzles - 0.3mm, 0.4mm, 0.5mm. It also comes with a grove mount plate, 1 x 40mm fan, 1 x 25mm fan, 1 x 12V cartridge heater and 1 epcos thermistor.

Read more

Price: $79.95
SKU: 3DP_HEXAGON_300

This is the Semitec 104GT-2 thermistor as used in the current J-Head hotend. These thermistors are a lot smaller than the EPCOS thermistor. You will find that the EPCOS won't fit in the thermistor hole in a J-Head, so if your J-Head thermistor is broken you need one of these.
This listing is for a pack of 2 Semitec 104GT-2 thermistors

View on the Semitec website here:- http://www.atcsemitec.co.uk/gt-2_thermistors.html

Price: $7.95
SKU: 3DP_THERM_104GT-2

This is a precision machined all metal direct drive extruder designed to work with 1.75mm filament. This extruder will mount directly onto an Ordbot 3D printer and has a hot end cooling fan built-in. This extruder is compatable with most popular grove mount hot ends such as the J-Head. If you want reliability and durability then a Bulldog extruder is what you are after!
*** Please note this extruder does not come with a hot end, pictures are for reference only! ***
Read more

Price: $129.95
SKU: 3DP_BD_LITE

This is a precision machined all metal extruder designed to work with 1.75mm or 3mm filament. This extruder will mount directly onto an Ordbot 3D printer and has a hot end cooling fan built-in. This extruder is compatable with most popular grove mount hot ends such as the J-Head. If you want reliability and durability then a Bulldog extruder is what you are after!
*** Please note this extruder does not come with a hot end, pictures are for reference only! ***
Read more

Price: $179.95
SKU: 3DP_BD_XL

This is a genuine J-Head Mk V-BV hot end designed and manufactured by Brian Reifsnyder. The J-Head hot end is well known and well respected in the 3D Printing community. This hot end is designed for 1.75mm filament and has a 0.5mm, 0.4MM or 0.35mm nozzel.
Read more

Price: $65.95
Choose the diameter of the Nozzle opening
SKU: 3DP_HOTEND_J-HEAD_175

This is a genuine J-Head Mk V-BV hot end designed and manufactured by Brian Reifsnyder. The J-Head hot end is well known and well respected in the 3D Printing community. This hot end is designed for 3mm filament and has a 0.5mm, 0.4MM or 0.35mm nozzel.
Read more

Price: $65.95
Choose the diameter of the Nozzle opening
SKU: 3DP_HOTEND_J-HEAD

The Smart Controller gives your RepRap style 3D printer the possibility to print "stand alone", without a PC connected! You can now print your G-code file directly from the SD card.

Simply connect it to your RAMPS or RUMBA controller, configure your firmware and you're ready to go.
Read more

Price: $24.95
SKU: 3DP_LCD_CONTROLLER_1

GT2 belt for use with RepRap style printers. This belt has a 2mm tooth pitch which give a much smoother movement and helps increase print quality over the standard 5mm pitch belts. This belt is supplied per meter. We have also have pulleys to suit.

Tech specs belt:
- Pitch: 2mm
- Width: 6mm

Price: $8.95
SKU: 3DP_BELT_GT2

Pages

Shopping cart

There are no products in your shopping cart.

0 Items $0.00

My Account

Postage

All items ship from our office in Townsville, QLD.
AustPost Tracking
Fastway Tracking

Newsletter Signup


Find us on Facebook